The Working Principle of Scroll Compressor

·       Air draws in through an inlet located on the outer side of the static vortex disk.

·       The air enclosed in the compression chamber is compressed toward the centre by a chamber reduction driven by the rotational motion.

·       The compression space is the smallest at the centre, and the highly compressed air is extruded outward through the vent at the centre.

·       1 - 3 (inhalation > compression > exhaust) motion action is repeated.

Reliable and Stable

·       Bearings with High-reliability surface treatment.

Low Vibration and Low Noise

Low noise close to the library environment. (3.7KW model, noise value is only 47dB[A])

Easy Maintenance

·       Medium-term maintenance cycle extended to five years or 12500 hours from the original four years or 10000 hours.

* The maintenance cycle for the 1.0MPa pressure compressor is still four years or 10,000 hours.

·       By adding oiling port, can fill up oil grease without removing the scroll disk of the scroll compressor. Simplify the maintenance process.

Energy Saving Under Multi-Compressor Compound Control

·       Based on the P mode control, added multi-compressor compound control, which allows switching between two unites.

·       Under the multi-compressor compound control mode, it automatically controls the number of compressors running according to the intake air consumption, the compressor operation simplifies while the required air pressure guaranteed.

P Mode Control

Same as the pressure switch mode, when the maximum pressure reached, the compressor stops running. When the resume pressure reached, the compressor starts again.

Multi-Compressor Compound Control

Compressor exhaust pressure automatically controlled around the required pressure (control pressure). Avoid power consumption for reaching the unnecessary maximum pressure, thus achieving energy-saving.

Function Behind

Several scroll compressors linked together if one of the units fails the rest still can guarantee the continuous air supply.

*The air exhaust will be smaller than the standard specification.

Optimized Cabinet Design

·       Save installation area.

·       Low vibration and low noise.